Flare Fitting, DZR Brass, NZ Made
Description: Flare Fittings are manufactured especially with hazardous liquids and gasses in mind. They are available in sizes ranging from 1/8″ to 3/4″, and are manufactured from high quality DZR grade brass alloy. All flare fittings conform to the following standards: AS D26, AS3688, AG 601-1995, NZG 1993/76.
Industrial Type : Use with copper, brass, aluminium, and flareable steel pipe. Install where medium to high pressures are encountered. Flare Fittings, when used with the Long Flare Nut, provide good resistance to vibration.
Ideal for use with fuel, oil, air, water and Natural Gas lines. In Applications where temperatures extremes are encountered we recommend the use of stress-relieved fittings.
Please contact our technical sales department for more information.
| Part Number | Description | Size Range |
|---|---|---|
| 44-4000202 | Titon Inv Flare M Ebw 1/8×1/8 | 1/8×1/8 |
| 44-4000302 | Titon Inv Flare M Ebw 3/16×1/8 | 3/16×1/8 |
| 44-4000402 | Titon Inv Flare M Ebw 1/4×1/8 | 1/4×1/8 |
| 44-4000404 | Titon Inv Flare M Ebw 1/4×1/4 | 1/4×1/4 |
| 44-4000502 | Titon Inv Flare M Ebw 5/16×1/8 | 5/16×1/8 |
| 44-4000504 | Titon Inv Flare M Ebw 5/16×1/4 | 5/16×1/4 |
| 44-4000604 | Titon Inv Flare M Ebw 3/8×1/4 | 3/8×1/4 |
| 44-4000606 | Titon Inv Flare M Ebw 3/8×3/8 | 3/8×3/8 |
| 44-4000806 | Titon Inv Flare M Ebw 1/2×3/8 | 1/2×3/8 |
Motion New Zealand has a rich heritage of over 100 years, dating back to 1919 with the establishment of Wilson Bros in Invercargill.
Since then the company has grown from strength to strength delivering quality engineering products and services essential to the New Zealand industry, through strategically located service centers and logistics networks.
Motion exists to keep our customer’s plants and equipment operating in an efficient and sustainable way.
