Locations Across New Zealand
0800 4 HOSES

Piusi Amalfi Marine DC Pumps


Bilge pumping.
Bilge pumps with excellent suction and pressure ability. Solid particles and debris can be handle without damaging the pump. Should be installed in a dry, well ventilated position above, but as close to the liquid as possible.

As the pumps must not be run dry, it is recommended to combine it with Automatic switch that cuts off the current to the pump when the bilge is dry. For Automatic / manual bilge pumping, the pump can be combined with bilge control panel.

Must not be run dry.


Part Number Fluid Type Volts/Hz Flow Rate (l/min) Flow Rate (gpm) Pressure (bar) Max Draw Fuse Ports – BSP
94-NMT400000 Water 12 32 8.4 1 13A 35A 1/2″